Textile effects

From ready-made products to concentrates and raw-materials: nanoCare will supply high-quality nanotechnology to fit your needs.

The “textile effects” division delivers innovative finishes for functional textiles, smooth leather or suede. Here surfaces are re-created on a molecular level or improved by nanotechnology (“boosters”).
By combining innovative materials with well-established foundation technologies, we create intelligent hybrid systems (INTELLIGENT HYBRIDS®) that set new benchmarks in respective markets.

Get in touch with your nano protection specialist and learn more about what innovative nanotechnology has to offer!

Nanoflex® Tex

  • Nanoflex® Tex barrier is a paraffin-based formula designed to achieve a water-repellent and water pressure-resistant finish on CO-CO/SYN camping equipment and CO canvases. It is fluorine-free and corresponds to the ZDHC joint roadmap.Through the intelligent arrangement of hybrid structures, Nanoflex® Tex barrier constitutes part of the Nano-Care Deutschland AG INTELLIGENT HYBRIDS® concept.The product comprises two concentrates that are diluted and applied in the foulard / padding process:
  • Nanoflex® Tex barrier – nano-modified paraffin (cationic)
  • Nanoflex® WPB – wetting agent (for wetting issues)

Specification
Chemical basis: nano-modified paraffin
Layer thickness: > 2000 nm
Water resistance: AATCC 22 / 100, ISO 4920 / 5
Oil resistance: no
Slip angle: not specified
Temperature stability: 150°C
Chemical stability: low
Weather resistance: up to > 1500h pursuant to ISO 11507 A
Wash resistance: low
Transparency: 100%
Storage stability: 1 year
Temperature sensitivity: -20°C to 40°C
Consumption: 40 – 80% dilution pick-up
Formula:

To achieve an outstanding water-repellent and water pressure-resistant finish on CO and synthetic blends, the following are recommended:

  • Rainwear (CO) 40 – 60 g/l (pick-up 60 – 70%)
  • Canvases (CO) or camping equipment 180 – 250 g/l (pick-up 50 – 80%)
  • Umbrella fabric (PA) 50 – 60 g/l (pick-up 50%)

Drying temperature 110 – 130°C > 3 min.

Materials must be free of anionic, surfactant residues. Silicones or surfactants impair effect and adhesion. We would be happy to offer technical support for pre-cleaning.

The system complies with all Ökotex classes (APEO/formaldehyde-free).

The product is based on non-flammable chemicals. They are non-hazardous according to ADR and IATA. Please observe the relevant safety data sheet when using the individual components.

Nanoflex® Tex 4

Nanoflex® Tex 4 is a water-based spray-on product for generating water, dirt- and oil-repellent effects. It is particularly suitable for the consumer and retail sectors due to its ease of use.Nanoflex® Tex 4 delivers outstanding protection for particularly absorbent textile substrates. Primary applications include absorbent upholstery/furniture, as well as suede/Alcantara leather. Most standard textiles, carpets and curtains can also be treated as long as they are free of surface-active substances (silicon/surfactants).The product is Ökotex certified (ECO Passport), UV stable and non-migratory. Through the intelligent arrangement of hybrid (organic and inorganic) structures, Nanoflex® Tex 4 constitutes part of the Nano-Care Deutschland AG INTELLIGENT HYBRIDS® concept.

Specification
Chemical basis: modified silicon dioxide
Layer thickness: approx. 100 – 150 nm
Water resistance: between 130° and 150° (20µl)
Oil resistance: between 120° and 130° (20µl)
Slip angle: not applicable
Temperature stability: 250°C permanent, 450°C peak
Chemical stability: between pH 1 and pH 13
Weather resistance: 3500h pursuant to ISO 11507 A
Wash stability: 10-40 washes LTD according to (AATCC) Test Method 135, ECE formulation washing powder, non-phosphate reference
Salt water resistant: yes
Transparency: 100%
Storage stability: 2 years
Temperature sensitivity: 1°C to 30°C
Consumption: 80 – 150 ml/m2
Application: The liquid is applied to the surface using standard pump spray systems. If the substrate does not instantly absorb, roller application is advised to ensure uniform wetting. The coating is fully cured after 24 hours.

Foulard/padding application is also possible. The wash stability can be increased in this process with Nanoflex WX (crosslinker).

Materials must be free of anionic, surfactant residues. Silicones or surfactants impair performance and adhesion. We would be happy to offer technical support for pre-cleaning.

Nanoflex® Tex 4 is only available in Textil and Tex 4 quality grades. These formulae contain respectively a very high proportion of active components. The product is water-based and a non-hazardous material according to ADR and IATA. It can also be shipped as a liquid concentrate (Nanoflex® Konzentrat TP).

Please observe the safety data sheet when handling Nanoflex® Tex 4.

Nanoflex® F-Bond System

Nanoflex® F-Bond System was developed in cooperation with one of the world’s largest textile manufacturer to prevent performance loss during the transition from C8 to C6 fluorocarbons. This involved the creation of boosters based on ultra-thin silicon dioxide, which give the C6 technology a greater impact whilst reducing the use of substances containing fluoride.

Through the intelligent arrangement of hybrid (SiO2 and C6 fluorocarbon) structures, Nanoflex® F-Bond System constitutes part of the Nano-Care Deutschland AG INTELLIGENT HYBRIDS® concept.

The system is comprised of several concentrates which are diluted and applied in the foulard/padding process:

  • Nanoflex® TH4 – silica-backbone and boosters  (cationic)
  • Nanoflex® F-Bond – ecologically optimised C6 fluorocarbon polymer (mild cationic)
  • Nanoflex® W11 – crosslinker for adhesion
  • Nanoflex® WA – wetting agent (for wetting issues)

Specification
Chemical basis: modified silicon dioxide / C6 fluorocarbon
Layer thickness: approx. 300 – 1000 nm
Water resistance: AATCC 22 / 100, ISO 4920 / 5
Oil resistance: ISO 14419 / 8-6 (depending on substrate)
Slip angle: not specified
Temperature stability: 220°C
Chemical stability: good LTD effects after chemical cleaning
Weather resistance: up to 3500h in accordance  with ISO 11507 A
Wash resistance: 25 – 100 washes LTD accordance with (AATCC) Test Method 135, ECE formulation washing powder, non-phosphate reference
Transparency: 100%
Storage stability: 1 year
Temperature sensitivity: 1°C to 40°C
Consumption: 50 – 80% pick-up (ready-mix)
Formula:

To achieve an outstanding, permanent stain guard against oil/grease and water-based contaminants e.g. on CO and synthetic blends, the following are recommended:

  • 20 – 30 gr/L Nanoflex® F-Bond
  • 10 gr/L Nanoflex® TH4
  • 8 gr/L Nanoflex® W11
  • 10 gr/L Nanoflex® WA
  • 0.5 gr/L acetic acid (60%)

Water absorption 50 – 80%
Drying under standard operating conditions, recommended: 100 – 130°C for 2 min
Subsequent curing : 170 – 185°C for 1 – 1.5 min.

For treating white or temperature-sensitive (<150°C) materials, we recommend using the alternative product WX instead of W11.

Materials must be free of anionic, surfactant residues. Silicones and surfactants impair performance and adhesion. We would be happy to offer technical support for pre-cleaning.

The product is based on non-flammable chemicals, which are non-hazardous according to ADR and IATA. Please observe the respective safety data sheet when using individual components.

Nanoflex® L-Care

Nanoflex® L-Care is a fluorine-free, water-based spray-on product for generating dirt- and water-repellent effects. It is particularly suitable for the consumer and retail sectors due to its ease of application on leather. The product corresponds with the ZDHC joint roadmap.

Nanoflex® L-Care delivers outstanding protection and nourishment, particularly on smooth leather. Most standard textiles, carpets, upholstery and curtains can also be treated, provided these are free of surface-active substances (silicones/surfactants).

Through the intelligent arrangement of hybrid structures (silicon dioxide/wax), Nanoflex® L-Care constitutes part of the Nano-Care Deutschland AG INTELLIGENT HYBRIDS® concept.

Specification
Chemical basis: combination of modified silicon dioxide and wax
Layer thickness: > 300 nm
Water resistance: between 130° and 150° (20µl)
Oil resistance: no
Slip angle: not applicable
Temperature stability: 180°C
Chemical stability: between pH 3 and pH 11
Weather resistance: 500h pursuant to ISO 11507 A
Wash stability: low
Salt water resistant: yes
Transparency: 100%
Storage stability: 1 year
Temperature sensitivity: 1°C to 30°C
Consumption: 30 – 50 ml/m2
Application: the coating is applied to the surface using a standard pump spray. If the substrate cannot instantly absorb the liquid, e.g. smooth leather, it should be rubbed in using gentle polishing motions. The coating is fully cured after 24 hours.

Materials must be free of anionic, surfactant residues. Silicones or surfactants impair performance  and adhesion. We would be happy to offer technical support for pre-cleaning.

The product can be affected if left for long periods of inactivity (e.g. creaming, sedimentation, separation). Stir or shake thoroughly before use.

The system conforms to all  Ökotex classes (APEO/formaldehyde-free).

Nanoflex® L-Care is  ready-mixed and is not available as a concentrate. The product is water-based and  non-hazardous in accordance with ADR and IATA.
Please observe the relevant safety data sheet when using Nanoflex® L-Care.

Nanoflex® Wash-on

Nanoflex® Wash-on is a polymer-based product for generating water dirt and oil-repellent performance on all fibres. It was specially developed for use in washing machines.

Nanoflex® Wash-on delivers outstanding protection for particularly absorbent textile substrates. The primary application is absorbent clothing, which must be free of surface-active substances (silicones/surfactants).

Through the intelligent arrangement of hybrid (organic and inorganic) structures, Nanoflex® Wash-on constitutes part of the Nano-Care Deutschland AG INTELLIGENT HYBRIDS® concept.

Specification
Chemical basis: fluorinated polymer
Layer thickness: > 300 nm
Water resistance: between 130° and 150° (20µl)
Oil resistance: between 120° and 130° (20µl)
Slip angle: not applicable
Temperature stability: 200°C
Chemical stability: between pH 1 and pH 13
Weather resistance: 500h pursuant to ISO 11507 A
Wash stability: 10 – 40 washes LTD pursuant to (AATCC) Test Method 135, ECE formulation washing powder, non-phosphate reference
Salt water resistant: yes
Transparency: 100%
Storage stability: 1 year
Temperature sensitivity: 1°C to 30°C
Consumption: 3 – 4% of the concentrate depending on the dry textile weight or 6 – 8% depending on volume of water in the washing machine
Application: The coating is applied during a wash cycle in conventional washing machines. No other detergent is required. Optimum performance is achieved from 4% based on the dry textile weight. The volume of water in the washing machine must be known in Advance if the dosage is measured on volume of water (6-8%)

The product achieves performance after air-drying; and is maximised by tumble drying (50°C).

Materials must be free of anionic, surfactant residues. Silicones or surfactants impair effect and adhesion. We would be happy to offer technical support for pre-cleaning.

Nanoflex® Wash-on is only available as a concentrate. The product is water-based and classified non-hazardous according to ADR and IATA.

Please observe the relevant safety data sheet when using Nanoflex® wash-on.

X